Have a Material Lifting Equipment Query?
See Our FAQ

What are Hasemer Materials Handling key offerings?

Hasemer Materials Handling specialise in providing tailored lifting solutions. We can assist you with the supply of Electric Chain Hoists, Wire Rope Hoists, Vacuum Lifters, Portable Gantry Cranes, Workstation Cranes, Jib Cranes, Kinesys Motion Control Systems, Manipulators, Spring Balancers, Crane Electrical Systems, Crane Kits, Manual Trolleys, Electric Trolleys, as well as Design and Engineering. We can also assist in keeping your crane and hoist systems in excellent operational order with quality original equipment manufacturers’ spare parts.

Hasemer Materials Handling is also able to provide Third Party Inspections, in accordance with AS 2550.1-2011.  This independent feedback we provide analyses and reports on your crane’s current condition, maintenance adequacy and utilisation levels.

How do I determine the most appropriate electric chain hoist for my lifting needs?

There are a number of issues that need to be considered when selecting the most appropriate electric chain hoist. These include:

  • Working load limit required (ie the maximum load lifted): GIS Electric Chain Hoists can lift up to 5,000 kg
  • Height of lift: GIS electric chain hoists can lift up to 120m
  • The frequency of use of the hoist: GIS electric chain hoists can operate at 360 starts per hour
  • The daily operating period: GIS has a duty rating of up to 60%
  • The environment that the hoist is operating: GIS electric chain hoists have an IP rating of 55 and can be upgraded to IP 65. Corrosion resistant models are also available.
  • The power supply: The GIS electric chain hoist comes in both single phase and three phase power. In addition, with GIS products sold in over 50 countries worldwide, almost all power supplies can be catered for.
What should I consider when selecting an Electric Chain Hoist?

Selecting the right electric chain hoist for your application can be a confusing task with numerous choices including GIS, Demag, Hitachi, Kito, SWF, Liftket, Nitchi and so on.

All these hoists will perform the basic functions of lifting loads at various work rates and over various lift heights. Almost all models have single of dual speed versions enabling easier positioning of the load.

If you want to minimise maintenance costs, ensure that the hoist is working how you want when you want and have a safe workplace. The factors that need to be considered are:

  • Motor performance
  • Switching capability
  • Safety features
  • Environmental protection
  • Ongoing maintenance
What is the GIS electric chain hoist’s motor performance?

The strength, capability and insulation of the motor will directly impact the hoist's ability to lift loads near to its WLL, the length of operating time and the working life of the hoist. There are two key aspects to this question:

  • The time rating of the motor - the period that it can operate at full load torque continuously without overheating. The GIS Electric Chain Hoist has duty ratings up to 60% for rated loads; and
  • The motor insulation - the highest temperature the material can withstand continuously without degrading or reducing motor life. The GIS Electric Chain Hoist has a motor insulation rating of Class F enabling it to operate at a maximum temperature of 155° C to yield an average life of 20,000 hours. Motors with class B ratings motors can only operate to a maximum of 130° C (and Class E - 120° C) to achieve the same life.
What is the GIS Electric Chain Hoists switching capability?
This measures the electric chain hoists' ability to activate and deactivate its brake without causing excess wear on the chain hoist. An industry wide measure is the number of starts per hour. GIS Electric Chain Hoists have the best rating at up to 360 starts per hour. Some hoists can operate only up to a maximum of 180 starts per hour. These hoists are often less robust that the GIS chain hoist.
What are the GIS Electric Chain Hoist's main safety features?
Our GIS Electric Chain Hoists are fitted with a range of safety features designed to protect your workers and equipment from damage or injury. Safety features include a double slipping clutch, a maintenance free braking system located on the drive shaft, emergency stop as standard, a low voltage pendant controller, fixed attachment of the chain to the hoist, geared limit switches, minimum 6:1 braking strength of chain, and sturdy aluminium construction. For a full list of the numerous safety features and designs of our GIS Electric Chain Hoists please speak with one of our lifting solution specialists.
What is the Ingress Protection (IP) rating of Hasemer's GIS Electric Chain Hoists?
The Ingress Protection Rating (IP rating) of the GIS Electric Chain Hoist is 55. This means that the hoist has limited protection against dust ingress, and protection against low pressure water jets in any direction. The higher the IP rating of the hoist, the better equipped the hoist is to operate in a wide range of environments, either interior or exterior. Lower rated hoists are more likely to result in increased wear and tear resulting in higher maintenance costs. It can be upgraded to IP 65.
What ways can Hasemer assist me in the ongoing maintenance of my crane and hoist system?

Hasemer Materials Handling is committed to providing ongoing, long term support and maintenance for all Lifting Equipment sold in Australia, New Zealand and the Pacific region. Hoist and Crane spare parts are available for electric chain hoists, crane kits, vacuum lifters, and other lifting equipment.

Servicing of your hoists and cranes is available either directly from Hasemer Materials Handling or through one of our many approved agents or resellers around Australia. Crane maintenance and repair will ensure that your Hasemer Materials Handling crane and hoist system remain productive and safe.

Where are the GIS Electric Chain Hoists, trolleys and KB Crane system made?
The GIS Electric Chain Hoists, Trolleys and KB Crane system are imported from Switzerland. For over 50 years the GIS factory at Schotz in Switzerland has been producing quality lifting equipment.
What should I consider when selecting a crane system?

In selecting a crane system there are three key factors that need to be considered:

  • Quality of the lifting and moving equipment: GIS' products are Swiss designed and manufactured in Switzerland ensuring excellent quality
  • The experience and capability of the crane designer and builder: With over 50 years experience in the Australian market, and backed by the worldwide GIS network, Hasemer Materials Handling have the experience to solve your lifting needs
  • The availability of spare parts and knowledgeable service support: Hasemer Materials Handling stock and source authentic spare parts for the full range of GIS equipment. With 50 years experience in Australia, and relationships with a wide range of resellers, distributors and other crane manufacturers, knowledgeable support and advice is always available.
  • Price: GIS products and cranes provide excellent value. With a need for a quality lifting solution that improves your productivity and employee safety, GIS cranes will operate effectively over a long period of time which will help minimise long term maintenance and replacement costs.
How does the Electric Chain Hoist duty cycle ratings help me make the right decision when selection a Chain Hoist lifting solution?
You will need to consider your duty cycle to ensure you’re selecting the right electric chain hoist for your maintenance and longevity requirements. We can help you assess the best lifting solution for your requirements, which will help minimise the long term maintenance and replacement costs of the strain and wear on your electric chain hoist.
What brands and equipment are available at Hasemer Materials Handling?
Hasemer Materials Handling distribute GIS Electric Chain Hoists, Trolleys and KB Crane Systems; GH Wire Rope Hoists and Crane Kits; Feltes Portable Aluminium Gantry Crane, Palamatic Lifting Equipment, and Hasemer Spring Balancers
Which industries use Hasemer Materials Handling products and services?

Hasemer Materials Handling supply products, service and advice to companies in the entertainment, manufacturing, utilities, mining, food processing, construction and transport industries.

What are the most common variations that are available at Hasemer Materials Handling?
There are a number of common variations in the cranes and electric chain hoists we provide to our customers. Variations include the lifting capacity of the crane system, the speed of the hoists and trolleys, the height of the lift, and the ability of the crane system to handle special environments. Our team of lifting specialists are able to advise the right solution based on your specific need.
Can Hasemer Materials Handling process large orders?
Hasemer Materials Handling is committed to meeting our customers' needs. As such we can supply a wide range of chain hoists, wire rope hoists, trolleys, crane systems, vacuum lifting equipment, portable gantry cranes and spring balancers. We also carry a wide range of spare parts for the products we sell. If you have a very large order, we will work with you to ensure that we are able to deliver your tailored lifting solution when you need it.
How do I get in contact with Hasemer Materials Handling?
You can call us on (02) 9771 9848, fax us using (02) 9771 9832, or email sales@hasemer.com.au Our full contact details can be found on the Contact Us page.